CareSens PRO Test Strips - 100

The CareSens PRO blood glucose test strip is for use with the CareSens Dual meter only. It does not require coding, just insert the strip into the meter and it is ready to use.

For more information about the CareSens Dual metre, click here

For more information about the Caresens KetoSens Test Strips (10), click here

ARTG Number - 227287

How to Use

CareSens PRO test strips don’t need manual coding and are designed to work with the CareSens Dual meters

A. PREPARING THE LANCING DEVICE

1. Unscrew and remove the adjustable tip.
2. Insert a new disposable lancet firmly into the carrier.
3. Twist off and set aside the protective cover of the disposable lancet and replace the adjustable tip.
4. Set the depth of penetration that you want to use; in thicker skin areas use a higher number; in thin sensitive skin areas use a lower number. Rotate the top portion of the adjustable tip until the setting number matches the arrow.
5. Cock the lancing device by pulling on the sleeve until the device clicks.
   

PREPARING THE METER AND TEST STRIP

1. Wash your hands and the site from which the blood will be drawn. 
2. Gently insert the square end of the test strip into the meter port with its contact bars facing upwards. The (strip with blood drop) symbol should appear on the screen.
3. Get a blood sample using your lancing device (see instructions above). 
4. Touch the pointed tip of the strip into the blood droplet on your finger, keeping the test strip vertical to the blood droplet, making sure the blood fills up the small window on the black side of the strip. Note: You only need about 0.4μl of blood (about the size of a pinhead). 
5. Once the blood sample has filled the confirmation window, the meter will beep. If the blood sample has insufficient volume, an error message will appear. 
6. The test result will appear after the meter counts down from 5 to 1. The result will automatically be stored in the meter’s memory.

Note:the test strip must be inserted into your meter before applying blood to the pointed end. The meter does not require any manual coding. CareSens PRO blood glucose test strips are for use only in CareSens Dual meters. The meter will switch off if the blood sample is not applied within 2 minutes of inserting the test strip into the meter.

Please Note

For your safety, never share a lancet with another person. These are sterile devices; do not use if the protective disk has been damaged or removed. Please ensure that used lancets are disposed of correctly. 

ARTG Number - 227287

ALWAYS READ THE LABEL AND FOLLOW THE DIRECTION FOR USE.

Remember to always seek advice from your medical practitioner before changing anything about your diabetes management. The above information is NOT medical advice.

Compatible Monitors

The CareSens Dual Monitor and System is compatible with these test strips. For more information --> Click here